PYROLYTIC incinerator
This incinerator with “PYROLYTIC” combustion must have: 15. A combustion chamber of waste: * Perfectly tight door for the manual loading of waste.The loading should be Manual, Batch Load, * A burner of lighting which the use is limited to the ignition of waste. * Top Loading loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory. * The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminum and insulates bricks in order to assure a minimum temperature on the outside sheet metal. * Composition of the refractory; Refractory concrete : . Thickness : ≥100 mm . Nature: 42% of Al203 Insulate in fibrous panels : . Thickness: ≥75 mm Nature: Calcium silicate. * Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve. * Plate of combustion in Carborundum, avoiding the fixing of glass and slags. 16. Load Method: Top Loading 17. A chamber of post combustion of gases * A burner of combustion of gases, * A device of injection of air allowing a total recombustion of gases, …
