Baghouse filter in a circular design, with automatic pulse-jet cleaning system of the filter bags
Temperature of ashes: 25oC with 60% RH
The filter shall operate with compressed air at 2-4 bar
Th baghouse filter shall be composed of a top section, filters section and bottom cone
Execution with flat cover, flanged onto the filter top.
Including: Pulse jet cleaning system, clean-air outlet, and tube sheet.
The filter bags are cleaned in rows by means of detachable blast pipes with high-efficient jet nozzles.
Tube sheet for installation of bags between dust- and clean-air chamber.
Electronic differential pressure gauge, indicating the differential pressure across the filter bags.
Electronic differential pressure control for jet pulsing at dP demand.
Compressed-air receiver with solenoid valves (IP65).
Filter regulator with automatic water separator and drain cock incl. fittings for mounting on the compressed-air receiver.
Filter Chamber, including:
Inlet at the top of the chamber (for down-flow filtration) and inspection door.
The filter cages are manufactured of 5 mm round-bar steel, with shaped sheet bottom, and top with a circlip ensuring a quick mounting
Filter bags with a sewn-in bottom and a stainless snap ring for fastening.
Filter bags material to be PTFE or Polypropylene to withstand corrosive ashes
A spare set of filter bags to be quoted with the complete system
Bottom Cone, below filter chamber
Including cleaning door
and supporting brackets on cone
Safety switch on inspection doors
Support frame for outdoor installation
Service platform, for positioning by inspection door, with handrail and access through the bottom. With ladder.
ATEX (inside/outside) Zone 20/Zone 22
Pressure-shock resistance (Explosion): 2 bars
With a Centrifugal fan: duty point of 2,000 cfm at 2700 Pa
All installation to be outdoor:
IP rating for any electrical to be for outdoor installation
Power: 230V/1Ph or 380V/3Ph, 50 Hz