Blog Archive

Hospital Waste Management as well as Competitive prices as Pakistan is a competitive market. We have a complete setup with Office, Customer Relations, Import / Export, Biomedical Department, Application Support Department & Project Designing Department.Description        Minimum Requirements Design standard    Multiple chamber …

BATON ROUGE, La. (WGNO) – A temporary restraining order has been granted blocking the disposal of incinerated waste from the Texas Ebola victim’s personal items at a Louisiana landfill. The restraining order, signed by Judge Bob Downing Monday afternoon requires the transportation …

It should  be  a three chambered incinerator The load capacity of 250 kg The housing for the incinerator should be able to withstand the temperatures and other operational requirements. The chimney should have a strong refractory lining of special type of cement …

the incinerator can be used to dispose  Medical waste IV, used needles, used syringes, scalpels, used dressing material ,personal protective equipments like gown, gloves etc. amputated body parts, excreta from patients and other laboratory waste.incineration units that can handle a mix of …

1)  Electricity Supply: (a) Mains Supply: (i)  Single Phase supply; 220 – 240V, 50Hz (ii) Three Phase supply; 380 – 415V, 50Hz (iii) The power supply outlet (sockets) for single phase supply system in the hospital is three pins and conforms to …

Clover Incinerator update A model incinerator for pet cremation and animal incineration. New design accept independent movable platform in-out incinerator combustion chamber. This new design is valid for model A900 and bigger model.

Veolia Environmental Services off Texas 73 will receive and begin destroying a shipment of medical waste from deceased Ebola patient Thomas Eric Duncan’s apartment within the next eight to 10 hours, Mitch Osborne, Veolia Gulf Coast Branch Environmental Services general manager, said …

i- burners: use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used for protection. 2- materials: -the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate …

j) Controls i) The controls (i.e., switches, knobs, etc.) should be visible and clearly identified, and their functions should be self-evident. ii) Device design should prevent misinterpretation of displays and control settings. iii) Switches and controls should be protected against accidental setting …

The incinerator shall be provided with a range of interconnecting ductwork between the thermal reactor outlet and the inlet of the chimney. This ductwork shall consist of refractory lined tubes and high temperature resistant tubes made from rolled sheet steel of minimum …

Vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi, id est laborum et dolorum fuga. …

More than two years after the deal’s controversial approval, Allentown has terminated its contract with Delta Thermo Energy, ending speculation about whether the company would ever build a proposed waste-to-energy facility in the city. In a letter dated Sept. 26, Allentown solicitor …

Physical /Chemical Characteristics: Boiling Point (_F) :  N/A                     Appearance & Odor: Off white, odorless Vapor Pressure(mm Hg): N/A        Volatiles (% by weight): N/A Vapor Density (Air =1) :N/A         Evaporation Rate )n-butylacetate=1): N/A HMIS Classification : Health:1; Flammability: 1   Reactivity Data: …

Intermittent Feed (w/optional loader): .9 yd3/hr (.7 m3/hr) up to 8 hrs/day         Specifications: Length overall -9′-6″ (2896 mm) batch system w/o loader         18′-6″ (5639mm) w/optional loader system Width overall -7′-6″ (2820mm)       …

Capacity UPTO 20 kg/hr Size: 940 x860x2700 mm Material: STAINLESS STEEL STACK, REFRACTORY CONCRETE LINING SPECIAL INSULATION MATERIAL With burner: 15 – 20 KW Temperature: PRIMARY CHAMBER = 800°C AND SECONDARY CHAMBER = 850 – 1200° C Sufficient heat generation for secure …

1.    Capacity of destruction in weight: 60 Kg/h. 2.    It should be able to operate not less than 10 hours/day 3.    This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… 4.    Design Specification …

  Incenerator Supply, installation and testing of medical waste incinerator with a capacity of 75 kilograms / hour, operated by LPG and including all accessories with chimney in accordance with the technical specifications and public health regulations Item 2 Incinerators room for …

Medical Waste Shredder    Capacity: Should be 150 liters.  Should be capable to shred up to 100 liters of the treated waste. 7  The technology should be capable to treat hospital waste including sharps like needles, lancets, scalpels and …

Medical Waste treatment unit The medical waste treatment unit shall be environmentally-friendly, and have a capacity of about 200-300kg per batch , to enable treatment of medical waste generated in a 160-bed hospital The equipment should be self-steam generating if steam is …

Carburant Diesel Capacité (M3) 1.92 Ave Capacity 1200kg Consommation (litre/heure 12 Dimension externes Longueur (mm) 3110 Largeur (mm) 2150 Hauteur (mm) 3200 Ouverture Porte 1000×2000 Dimension internes Longueur (mm) 2200 Largeur (mm) 1050 Hauteur (mm) 800 Opération. incinerator small to medium waste …

use in the hospital for burning hazardous waste and chimicals, minimum Capacity 300 per hour. I will be reselling to my client?. Below is the information I was given and nothing else. The hospital incinerator for use in the clinical waste as …

A chamber of post combustion of gases * A burner of combustion of gases, * A device of injection of air allowing a total recombustion of gases, * A device of air inlet of cooling of waste gases, * A sheath of …

SMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE ?    Quantity: 20 units ?    The Incinerator works with a 55 gallon open ended steel drum ?    The unit operates without fuel and used only 120v or 220v electricity for the blowers ?   …

Automatic loading and reloading with capacity of 10 to 12 tons per day working with gas treatment methods and gas fuel and should comply with the European Standards.the Government Hospital for Medical Waste Incinerator with the following Specifications. they are having general …

Containerized waste incinerator is our latest design for market. This incinerator is build in ISO container before leave factory. After customer received container, install the chimney and connect with electric power and setup oil tank, that’s all. Now, the burning capacity can …

———————————–   Failure to establish the authenticity of the certificate the bidder is liable to render the bid non-responsive and bidder open to action in the line with applicable regulations and act. Original catalogue must be submitted Original data sheet must be …

Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator manufacturer in China. We are local  manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical waste, Pet …

The purpose of the start-up burner is to ignite waste materials and to maintain the prescribed minimum temperature in the primary chamber. It shall be mounted in the lower part of the primary chamber.   The start-up burner shall function automatically when:- …

Early this week, the Obama administration unveiled historic environmental rules to cut carbon pollution from power plants by 30% by 2030. The rules, announced formally by the Environmental Protection Agency, are the first time any president has moved to regulate carbon pollution …

It is expected that the Bidder will cooperate closely with PATH and target Hospitals for the new waste handling building/area and will make available all needed technical information, drawings, etc.,   The following waste streams shall be treated in the new HCW …

Capacité destructive de 55 Kg/h jour de déchets hospitaliers  avec un p?.c. i jusqu’à 3.200 Kcal/Kg 1)Type de déchet hospitalier 2)Pouvoir calorifique inférieur                                                                        3.200 kcal/kg 3)Humidité                                                                                                          20% 4)Teneur  en cendres et/ou inertes                                                                       8% 5)Capacité destructive nominale                                                                         55 kg/h 6)Volume chambre de combustion                                                                     …

The Southern Illinois company that makes medical waste incinerators is now rushing an order to West Africa to help stop the Ebola virus from spreading. We first reported on the ‘Medi-Burn’ in August when Carmi-based Elastec started offering its services to the …

The Volume of the combustion chamber at least: 1.200 L   The Dimension of the door for loading in cm at least: 70×70.   The Incinerator Plant is output wastes incineration from Different petrochemical units. In this project we want to incinerate …

We have a 70 bed hospital in namibia. however there is a potential of getting customers from other local doctors. a small incinerators (ex. please see attached) for some empty chemical bags. Can you please provide me with some details information about …

The switchboard shall operate in a room with the following prevailing conditions:   –      Maximum ambient temperature of 40 0C –      Maximum relative humidity of 95% –      Saline atmosphere –      Altitude: at sea level –      Climate type: Wet and humid coastal conditions …

We are looking for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital wastes) per day or per hour. …

Load Capacity minimum:  1500 kg Burner fuel type:  Diesel Burner fuel rate max.:   20-25 Liter diesel/ per hour Burners minimum: 3 Burning rate minimum: 200-300kg/per hour Furnace bar area minimum: 2 м3 Fuel tank capacity minimum: 300L Main chamber burning temperature min. …

INCINERATOR, DIESEL DRIVEN waste type : HEALTH CARE WASTE Waste calorific value : 4000KCAL/KG Moisture Content : 10-25% Nominal Capacity : 50Kg/Hour batch load Secondary Chamber : 2 Seconds @ 850degrees C The primary combustion chamber must ensure minimum exit temperature is …

Waste type: health care waste Waste density: 125 to 350Kg/M3 Waste calorific value: 4000KCAL/kg Moisture content: 10 – 25% Estimated ash residue: 5 – 10% Nominal capacity: 50kg/hr batch load Secondary chamber: 2 seconds@850?C Environmental: NEMA ACT (EMCA) 1999, Waste Management regulations, …

The first is a small 20kg/per hr incinerator for a small-medium sized hospital, and the second is a 500kg per/hr incinerator for a company planning to start a incineration service in Lahore.Burn Rate : >200 kg per hour Average fuel consumption : …

The incinerators to be supplied shall meet the following specifications ISO certified Model:   250LA ,multiple diesel fuel combustion chambers Performance capacity 120Kg/hr GRE 1.25 for HCRW 96Kg/hr GRE 1.25 for general waste. 40Kg/hr GRE 3.00 for plastic Waste type :   health care …

* All models with Dual combustion chamber. * Stainless Steel chimney/stack, long lifetime. * High temperature, long lifetime of incinerator. * Free or minimum installation on site. * High burn rate, from 10kgs to 100kgs per hour. * PLC Control Plane for …

Are we the only ones “out there”? This question and many like it have been asked for years, with no concrete answers available. But as scientists delve further into deep space and discover distant galaxies, the most likely answer seems to be …

The successful bidder shall deliver the incinerator skid in a container. The container will be emptied by CEB and returned to the successful bidder / or to its shipping agent. A containerized solution is also acceptable. Electrically operated 220 volt ( 60 …

Incinerator but the size of chamber > 2000 x >1200 mm. Prepare for burn LIQUID Waste +/- 20 liter/hr. Fueled by Heavy OIL Burner.waste disposal incinerator, capable of handling both wet and dry garbage.. Which include house hold wastes and dry leaves. …

18   Electrical supply required 3-phase 19   Auxiliary fuel      Diesel or paraffin 20   Primary burner 21 Secondary (after) burner 22 Type of burners   Automatic pressure jet 23   Output Primary   Approx 600 000 kJ/hour 24   Output Secondary      Approx 750 000kJ/hour 25 Emission control Heated …

The incinerator plant shall incorporate a control panel for its operation. On the control panel we shall have a visual display of the chamber temperatures. This visual display must control and monitor the incinerator and his performance. Capacity of destruction in weight …

  Incinerator to burn nearly 10ton(10,000kg) of tobacco waste dust) from a tobacco processing plant. Requirements: Incinerator system complete with scrubber, pollution control system, water system, loading system, ash removing system and if anything more option is available. we have to burn …

INCINERATOR DESCRIPTION The Model is for up to 300kgs capacity per batch load and will burn at around 55kgs per hour. The unit has top loading design and has a heavy duty refractory cement lining for maximum heat retention. Unit have large …